I've always had gas/propane appliances where applicable...
I've been in my current residence for about 25 yrs having
built it myself.... I'm a Carpenter/Contractor/Currently a Building Inspector!
My problem is... I just refilled my Propane Tank...
I had some difficulty in lighting the pilot for the Water Heater, then, getting
my stove burners to lite @ all!
After fiddling & assuring myself that all petcocks were 'on', I was able to
get a weak flame. I left the burner on until the flame became strong as
per the usual!
I just tried to fire a burner and, again, have not gas flow... none @ all to
any of the burners...
What the Hey!!!!
Bad pressure valve...??
First I would try the open and shut valve at the tank, it may not be open entirely. If not here are some common problems in the link below just read through the thread.
You may have to copy and paste the link.?
or Join us
Get timely DIY projects for your home and yard,
plus a dream project for your wish list!