making easier access to under a small crawspace under a pourch addition

I have an porch addition and have stuffed stored under there. But its hard to get to it. I was thinking of how to build some type of /sliding wheel system using small wheels connected to a plywood. just a thought. What are your thoughts.

thanks

Jon

There are systems like this already in use for beds, attics, kitchens, pickup beds, etc.. So I don't see any reason not to do it..

Thanks. I'll go ahead and try this. 

any suggestions how to make something with a 4 x8 plywood and wheels

I guess I would start with a 2by3 frame 4' x 8', lay your plywood on top and screw it in. In the frame run a 2by3 length wise down the middle then add a couple of cross braces. Use either some old push mower wheels, wagon wheels, etc., attach to the framing or use a rod completely through. Basically just make a low riding wheel cart..