RDA Blog - Breadcrumbs

DIY Advice Blog

Get the latest information on new tools, trends and ideas for your DIY projects from The Family Handyman experts.

Drip Irrigation for Vegetables

  • Comments 4
Automatic drip watering system
The setup is easy to install and costs less than $50.
Raised-bed vegetable garden
This raised-bed vegetable garden is watered automatically every three days by a drip watering system.
Close-up of emitters in drip watering system
Emitters installed every 12 in. or so provide even watering.

I have a little, 4 x 16-ft. raised-bed vegetable garden and a couple of big containers for veggies (top-left photo). Unfortunately, I'm often out of town (camping trips, mostly) and have had a hard time keeping up with watering. I needed some backyard irrigation. So I built this automatic drip watering system. It was simplicity itself. All the parts are off-the-shelf from a home center, and cost less than $50. I made a grid of brown supply pipe, the pipes about 8 in. apart (top-right photo) and attached a hose fitting. I put emitters (the round black parts in the bottom photo) every foot or so to give the whole bed a nice, even watering. If you've never used this type of drip irrigation system, you'll find a small tool, sold with the emitters, that punctures a hole in the plastic pipe. Then the emitters just push into the holes. That's it.


For the containers in front of the bed (you can see them clearly in the top photo), I attached a ¼-in. line with built-in emitters, which coils around the top of each container. It goes in just like a single emitter. A simple battery-powered timer turns the system on every three days for a thorough soaking. The most time-consuming part was installing an outdoor faucet to provide water for the backyard irrigation system.


I've used this rig for five years now, and it works amazingly well. With a little mulch to keep the weeds down, I can go away for two weeks or more without the need to water. In the winter, I blow the system out with compressed air and hang it on the side of my garage. Now if I could just rig up an automatic harvester...


— Ken Collier, Editor in Chief


How to Install an Irrigation System in Your Yard

Fixing Sprinkler Systems



Blog - Post Feedback Form TFH
Thank you, your comment requires moderation so it may take a while to appear.   Close
  • * Please enter your name
  • * Please enter a comment
  • Comments
    • by posted on

      Hi Ken, Could you put together a parts list for others to replicate your design? Thanks for the idea. Ken C.

    • by posted on

      Hi Ken,%0d%0aA parts list would be handy so I know what to buy.%0d%0aThanks.

    • by posted on

      Hi Ken,

      A parts list would be handy so I know what to buy.


    • by posted on

      My grandmother has a fairly large garden space and she has been interested in finding some sort of irrigation system for it. Would you happen to know if the drip irrigation services in Irving, TX will come and look at her large garden? She is just ready to have some help with watering her plants because it is getting harder for her to move around with ease.

    Page 1 of 1 (4 items)
    Save and organize projects in your Project Binder with a FREE Membership! Join today

    Free OnSite Newsletter

    Get timely DIY projects for your home and yard, plus a dream project for your wish list!

    Follow Us